Focused arrival windows
Useful updates and clear arrival timing.
When you need Plumbing in Weaver, Mamas Plumbing Solutions answers the phone and shows up ready to work. We handle everything from a dripping faucet on Jacksonville Road to a failed water heater near Weaver High School. Our licensed plumbers know the older homes, the cold snaps, and the hard water that cause most problems here. One call gets a real technician, a clear price, and the job finished.
Useful updates and clear arrival timing.
Review the approach and price before deciding.
Equipped vehicles and respectful cleanup.
Neighbors serving neighbors with follow-through.
Plumbing in Weaver is a category of residential and light commercial service work that keeps water coming in clean and waste going out fast. That covers drain cleaning, leak detection, water heater repair, sewer line work, and gas line repair for homes and small businesses across ZIP code 36277. Weaver is a small suburban community just off Highway 21, close to Anniston and Jacksonville, and most of the housing stock here was built decades ago. That means galvanized and early copper pipe, original water heaters, and sewer lines that have seen plenty of root intrusion. We work in Weaver Heights, Downtown Weaver, Blue Mountain, and along Jacksonville Road every week. If you search for plumbing repair near me Weaver Alabama, you want a crew that knows these streets and these houses. We do. Our Weaver plumbing services cover everything from a running toilet to a full sewer line replacement, and we price the work before we start.

Weaver homeowners call us for the same core problems year after year: clogged drains, leaking pipes, water heaters that quit, and sewer lines that back up. Because the housing stock is older, we also do a lot of repiping and fixture replacement. If you need same-day plumbing service Weaver Alabama, call before noon and we will do everything we can to get a technician to your door that day. Every service below is available throughout Weaver and the surrounding Calhoun County area.
Slow or backed-up drains are the number one call we get in Weaver. We run a drain snake first, then follow with a hydro jetter when grease or roots are the cause. Kitchen sinks, tubs, and floor drains in older Downtown Weaver homes are common. We clear the line and test it before we leave.
View service →02A dripping faucet in a Weaver Heights home usually means a worn cartridge or seat. We stock Moen, Delta, and Kohler cartridges on the truck so most repairs finish in one visit. We fix the leak, check the supply lines, and make sure the shutoff valves still work.
View service →03Upgrading a kitchen or bath faucet in Weaver? We handle the swap, replace the supply lines, and check the drain assembly while we are under the sink. Older homes near Blue Mountain often need new shutoff valves at the same time. We install Moen, Delta, and Kohler fixtures.
View service →04Hidden leaks waste water and rot framing. We use leak detection equipment and pressure gauges to find the source without tearing up walls or floors. Slab leaks in Weaver slab-on-grade homes are a frequent find. Once we locate it, we show you exactly where the problem is.
View service →05After detection, we repair the leak with the right material: PEX, copper, or PVC depending on the line. We cut out the damaged section, solder or crimp the new pipe, and pressure-test before closing up. Weaver homes with old copper lines are our most common leak repair calls.
View service →06Burst, cracked, or corroded pipe gets fixed fast. We carry copper pipe, PEX pipe, PVC pipe, and the fittings to match what is already in your Weaver home. Frozen pipe splits in winter are a regular call. We repair the section, insulate it, and check the rest of the run.
View service →07Sewer backups in Weaver are usually root intrusion or grease buildup. We run a sewer camera first to see what we are dealing with, then clear the line with a drain snake or hydro jetter. We show you the camera footage so you know the line is actually clean.
View service →08Cracked or root-damaged sewer lines in older Weaver neighborhoods need spot repairs. We dig to the damaged section, replace it with PVC pipe, and restore the yard. Most repairs finish in one day. We camera the line afterward to confirm flow.
View service →09When a Weaver sewer line is too far gone, replacement beats repeated repairs. We run new PVC pipe from the house to the city main, tie it in, and test it. This is a bigger job, but it ends the backups for good. We handle permits and inspections.
View service →Plumbing work in Weaver runs on the Uniform Plumbing Code (UPC) and Alabama Plumbers License requirements. That means permits for sewer line replacements, proper venting on water heaters, and backflow prevention on any cross-connection work. Most Weaver homes sit on slab or crawl space, and the older ones have copper or galvanized pipe that needs careful handling. We stock PEX pipe, copper pipe, PVC pipe, and ABS pipe on the truck so we are not making supply runs mid-job. In winter, frozen pipes are the big one. We insulate exposed lines and check crawl spaces before we leave. If you need a local plumber in Weaver AL who knows the code and the housing stock, we are set up for it. Scheduling is straightforward: call, get a window, and we show up in it. We park on the street or driveway and keep the work area clean.
Galvanized lines corrode from the inside, which drops water pressure and turns the water brown. Thin copper splits at fittings. Both mean more leak calls and more repiping work in Weaver than in newer towns. We inspect the visible pipe runs first and tell you what is failing and what still has life. When we repair, we match the material or transition properly with the right fittings. If a whole run is bad, we quote repiping with PEX pipe and do it in sections so you are not without water for days.
Weaver gets hard freezes most winters. Pipes in crawl spaces, garages, and under uninsulated floors split when they freeze. That turns into a 2 a.m. emergency call and water damage. We insulate exposed lines and add heat tape where it makes sense. When a pipe does freeze and split, we repair the section, check the rest of the run, and pressure-test. We also tell you which lines to drip on cold nights.
Older Weaver neighborhoods still have clay or cast iron sewer lines. Roots find the joints and grow in. That causes slow drains, backups, and eventually a collapsed line. We run a sewer camera first so we know exactly what is in the line. Then we clear it with a drain snake or hydro jetter. If the pipe is cracked or root-damaged beyond cleaning, we quote a spot repair or full replacement with PVC pipe.
All plumbing work in Weaver has to meet UPC standards for pipe sizing, venting, and materials. That affects how we run new lines and how we tie into existing systems. We pull permits when the job requires it.
Plumbing work in Weaver must be done by a licensed plumber or under one. We hold the proper Alabama Plumbers License and Master Plumber License credentials. That protects you if something goes wrong.
Any work that could cross-connect potable water with waste or irrigation needs backflow prevention. We are certified to test and install backflow assemblies. This comes up on commercial and irrigation jobs in Weaver.
Weaver has its own set of recurring plumbing issues. The older housing stock, the cold winters, and the clay soil all play a role. If you live here long enough, you will see some of these. Knowing what causes them helps you know when to call. Here are the four we see most.
Many Weaver homes were built on slabs with copper pipe running underneath. Copper corrodes over time, especially in areas with shifting soil. When it fails, water runs under the slab and finds the path of least resistance, often up through flooring. We use leak detection equipment to pinpoint the leak without tearing up the floor. Then we bypass the failed section with PEX pipe run overhead. This avoids jackhammering and saves you thousands compared to a slab tear-out.
Older Weaver neighborhoods still have clay or cast iron sewer lines. Roots from trees and shrubs find the joints and grow in. Over time, they block the line and cause backups. This is worse in wet years when roots grow faster. We run a sewer camera first to see the extent of the intrusion. Then we clear the line with a drain snake or hydro jetter. If the pipe is cracked, we do a spot repair with PVC pipe. We camera the line afterward to confirm it is clean.
Weaver gets hard freezes in winter. Pipes in unheated crawl spaces, garages, and under uninsulated floors are vulnerable. When water freezes, it expands and splits the pipe. The leak shows up when it thaws. We repair the split section, pressure-test the line, and insulate the exposed pipe. We also add heat tape where it makes sense. We tell you which lines to drip on cold nights to prevent it from happening again.
Weaver's water has minerals that settle in the bottom of the tank. Over time, that sediment causes the tank to overheat and fail. Most water heaters here last 8 to 12 years. When they go, they usually leak or stop heating. We diagnose the failure. If it is a heating element or thermostat, we repair it. If the tank is leaking or full of sediment, we replace it. We install Rheem and Bradford White units and check the anode rod and expansion tank at the same time.

Plumbing pricing in Weaver follows the same general range as the rest of Calhoun County. Typical 2026 pricing for a service call runs $89 to $150 for the diagnostic, which we waive if you approve the repair. Small jobs like a faucet cartridge replacement or toilet flapper run $180 to $350. Water heater replacements run $1,200 to $2,200 installed, depending on size and fuel type. Sewer line spot repairs run $1,500 to $4,000, and full replacements can run $6,000 to $12,000. We give you the price before we start. If you need an affordable plumber Weaver AL, call us and we will tell you what the job should cost.
A faucet repair on an open vanity is quick. The same repair behind a tiled wall or in a tight crawl space takes longer. We quote based on what we actually have to do, not a flat rate that overcharges easy jobs and undercharges hard ones.
Standard parts like Moen cartridges and toilet flappers are inexpensive. Specialty parts, tankless heater components, or backflow assemblies cost more. We use quality parts from brands like Rheem, Navien, and Zoeller so you are not replacing them again next year.
After-hours and weekend calls carry a higher rate. If you can wait for a scheduled visit, you will pay less. We tell you both options when you call so you can decide. No surprises on the invoice.
Weaver is not a big town, but knowing the landmarks makes a difference when we are routing calls. Weaver City Hall and Weaver Park are easy reference points for the center of town. Weaver High School anchors the north side. Jacksonville State University is just up the road in Jacksonville, and Anniston Regional Airport is a short drive south. We use these to confirm addresses and plan routes so we are not circling. If you are new to Weaver, give us the nearest landmark and we will find you.
Weaver City Hall is a central reference point for Downtown Weaver addresses. When a customer gives us a street name we do not recognize, we use City Hall as the anchor to find the right block.
Weaver Park is a familiar landmark on the west side of town. It helps us orient calls in the surrounding residential streets. We use it to confirm we are in the right neighborhood before we knock.
Weaver High School is a clear marker on the north end of town. Addresses near the school are easy to route. We also know the traffic patterns around drop-off and pick-up times.
JSU is just north of Weaver in Jacksonville. It is a useful reference for calls on the north edge of our service area. We route those jobs through Jacksonville Road.
Anniston Regional Airport is south of Weaver near Oxford. It helps us plan routes for calls on the southern end of town. We use it as a boundary marker for our service area.
Jacksonville Road is the main commercial strip through Weaver, with small businesses, shops, and restaurants. We handle drain cleaning and grease line work for several of these. It is also the main route between Weaver and Jacksonville.
Downtown Weaver has a small cluster of businesses near City Hall. Most are service-oriented and older buildings. We do occasional plumbing repair and fixture replacement for these properties.
Highway 21 runs through Weaver and connects to Anniston and Oxford. It is our primary route in and out of town. Most Weaver calls are within a few minutes of the highway.
Jacksonville Road links Weaver to Jacksonville and JSU. We use it for calls on the north side of town. It is also the main commercial corridor.
We work all over Weaver, from the older streets near Downtown Weaver to the newer builds off Jacksonville Road. Each area has its own plumbing quirks, and we know them. Here is where we spend most of our time.
Downtown Weaver has some of the oldest housing stock in the area. Galvanized pipe, original sewer lines, and small crawl spaces are common. We do a lot of leak repair and drain cleaning here. Water heaters in these homes are often overdue for replacement. Right off Highway 21, so we reach Downtown Weaver in minutes from our Eastaboga base.
Weaver Heights is mostly mid-century homes with copper pipe and slab foundations. Slab leaks and failing shutoff valves are frequent calls. We also see a lot of faucet and toilet replacements as fixtures wear out. The streets are easy to work, with good driveway access. A short drive from Downtown Weaver, usually under 15 minutes from dispatch.
Blue Mountain sits on the edge of Weaver toward Anniston. Homes here range from older farmhouses to newer builds. Well water and septic systems still exist on some properties, which changes how we approach repairs. We handle both. Close to the Anniston line, so we often route Blue Mountain calls with Anniston jobs.
The Jacksonville Road corridor has a mix of homes and small businesses. Commercial drain cleaning and grease line work come up here. Residential calls are mostly water heater and sewer line issues. Traffic can be heavy, so we schedule around peak hours. Direct route via Jacksonville Road, typically 10 to 15 minutes from our shop.
These are real examples of the work we do in Weaver. They show what we find, how we fix it, and what it costs. Every job is different, but the approach is the same: diagnose, repair, test, and leave it better than we found it.
A homeowner in Weaver Heights had a slab leak that was soaking the carpet in the hallway. The water bill had doubled over two months. We used leak detection equipment and a pressure gauge to isolate the hot water line under the slab. We bypassed the failed section with PEX pipe run through the attic, which avoided jackhammering the floor. The repair took one day. The leak stopped, the water bill dropped back to normal, and the carpet dried out. The homeowner saved thousands compared to a slab tear-out.
A rental property near Jacksonville Road had a sewer backup that flooded the basement. The tenant reported slow drains for weeks before it backed up. We ran a sewer camera and found root intrusion at a joint in the clay line. We cleared the line with a hydro jetter, then did a spot repair with PVC pipe to replace the damaged section. We camera-tested the line afterward. The backup cleared, the line flowed freely, and the landlord avoided a full sewer line replacement. The repair cost a fraction of replacement.
A family in Downtown Weaver had no hot water on a Friday morning. The water heater was 14 years old and leaking from the tank. We confirmed the tank was failed and quoted a same-day replacement. We installed a new Rheem 50-gallon unit, replaced the expansion tank, and checked the venting and gas line. The install took about four hours. Hot water was back by mid-afternoon. The new unit came with a 6-year warranty on the tank. The family did not have to wait through the weekend.

We had a slab leak in our Weaver Heights home and were worried about the cost. The technician found it with leak detection equipment in under an hour and explained the bypass option. No jackhammering, no mess. The water bill is back to normal. I would call them again for any plumbing issue.
Our sewer backed up on a Sunday near Jacksonville Road. They came out same day, ran a camera, and showed us the root intrusion. Cleared it with a hydro jetter and did a spot repair. Fair price, no upsell. They even cleaned up the basement area before they left.
Water heater died on a Friday morning. They had a new Rheem installed by that afternoon. The plumber was polite, explained the warranty, and made sure the venting was right. I appreciated that they did not try to sell me a tankless unit I did not need. Good local company.
Weaver's climate drives plumbing demand in predictable ways. Winter brings frozen pipes. Summer brings higher water use and more drain clogs. Spring and fall are for maintenance and repairs you put off. Here is what to expect each season and what you should do about it.
Spring rain saturates the ground, which can shift soil and stress underground pipes. We see more water line leaks and sewer line cracks this time of year. Sump pumps get a workout in crawl spaces and basements. It is also a good time to check for winter damage.
Summer means higher water use: irrigation, pools, more showers. That extra demand can expose weak pipes and failing fixtures. Drain clogs from grease and hair are common. Water heaters work harder and sediment builds up faster.
Fall is the time to prep for winter. We get calls for pipe insulation, water heater tune-ups, and sump pump checks. Leaves and debris can clog exterior drains. It is also a good time to fix that dripping faucet before it freezes and splits.
Winter is our busiest season for emergencies. Frozen pipes split and cause water damage. Water heaters fail when they work hardest. Sewer lines can slow down if they are already partially blocked. We run 24/7 emergency calls for these.
Weaver sits in the middle of our service area, which means we can reach several nearby cities quickly. If you are in Weaver and need service, we are close. If you are in one of these neighboring towns, we cover you too. Here is how they relate to Weaver.
Not every plumber in Weaver is the same. Some are licensed and insured. Some are not. Some give you a price upfront. Some surprise you at the end. Before you hire anyone, ask these questions. The answers will tell you whether you are dealing with a pro or a risk.
Alabama requires a license for plumbing work. If your plumber is not licensed, you have no recourse if something goes wrong. Insurance protects you if they damage your home. Ask for the license type and the insurance carrier. A real pro will have it ready.
A written price protects you from surprise charges. Some plumbers quote low and add fees later. We give you the price before we start. If the job changes, we tell you before we do the extra work. No surprises.
A warranty means the plumber stands behind the repair. Ask how long the warranty is and what it covers. We warranty our labor and the parts we install. If something fails, we come back and fix it. That is how it should work.
Plumbing emergencies do not wait for business hours. Ask if they offer 24/7 service and how fast they can get there. We run emergency calls around the clock. You get a real person on the phone, not a voicemail.
Cheap parts fail fast. Ask what brands they use for water heaters, faucets, and pumps. We use Rheem, Navien, Moen, Delta, Kohler, Zoeller, and Liberty Pumps. Quality parts mean fewer repeat repairs and a longer lifespan.
Alabama Department of Environmental Management
U.S. Environmental Protection Agency
Occupational Safety and Health Administration
$2M general liability and workers compensation
Member
Member
Most jobs in Weaver run $180 to $450 for common repairs like faucet replacements, toilet repairs, and drain cleaning. The diagnostic fee is $89 to $150 and we waive it if you approve the repair. Bigger jobs like water heater replacement run $1,200 to $2,200 installed. We give you the price before we start.
The best plumber is the one who shows up when they say they will, gives you a clear price, and fixes the problem right. We are licensed, insured, and we warranty our work. We serve Weaver weekly and know the housing stock. Call us at (205) 708-6253 and judge for yourself.
Yes. We offer 24/7 emergency plumbing in Weaver AL for burst pipes, gas leaks, sewer backups, and no-hot-water situations. Call (205) 708-6253 any time. You get a real person, not a voicemail. We dispatch the nearest technician and give you an arrival window.
We offer drain cleaning, faucet repair and installation, leak detection and repair, pipe repair, sewer cleaning, sewer line repair and replacement, toilet repair and installation, water heater repair, installation, and replacement, tankless water heater service, sump pump repair and installation, water line repair, and gas line repair. All available in Weaver and throughout Calhoun County.
Yes, for most calls placed before noon. We keep same-day slots open for Weaver and the surrounding area. If you call in the morning, we can usually get a technician to your door that afternoon. For emergencies, we run 24/7 and will get there as fast as we can.
Not seeing your question? Our local team can help you understand urgency, scheduling and what to expect.
Ask the local teamCall us at (205) 708-6253 or send an email to [email protected]. We answer the phone during business hours and return messages after hours for emergencies. If you've got a leak, a clog or no hot water, don't wait. Reach out and we'll get you on the schedule.